LED wall lamp installation method

LED lamps are the hottest lamps now. Led lamps have been designed in all aspects, and its styles are increasing. Wall lamps are a common type of lamps in our homes, making our homes more romantic. When it comes to the installation of LED wall lamps, many friends are not clear. Next, let's take a look at the installation method of LED wall lamps.

1. First, fix the LED wall lamp with screws, connect the LED wall lamp to the power cord firmly, and wrap the unused wire ends with waterproof tape; when installing the LED wall lamp wiring, a branch power supply can be connected in series with up to 8-10 wall lamps; or connect another power cord after 50 meters. After the installation is completed, please check the installation line, and after confirming that the installation is correct, turn on the control power supply.

2. LED lamp cups cannot be installed directly on flammable objects. For the sake of beauty, some families use painted plywood to line the back of the ceiling lamp. In fact, this is very dangerous and insulation measures must be taken; if the high-temperature part of the lamp surface is close to flammable objects, insulation or heat dissipation measures must also be taken.

3. The connection between the LED lamp cup wire and the lamp holder, and the connection between the parallel wires between the lamp holders should be firm, and the electrical contact should be good to avoid sparks between the wire and the terminal due to poor contact, which may cause danger.

4. Before installing the LED lamp cup, the cross-section of the wire core leading to each lamp should be checked. The copper core soft wire should not be less than 0.4mm2, and the copper core should not be less than 0.5mm2, otherwise the lead wire must be replaced. If the LED lamp cup needs to be fixed with expansion bolts, the bolt specifications should be selected according to the technical requirements of the product, and the drilling diameter and burial depth should be consistent with the bolt specifications.

The above is the relevant content about the installation method of LED wall lamps. In fact, installing LED wall lamps is very simple, and it can be easily completed as long as you pay attention to some important steps.